English- Home
- Stock Categories
- Technical Articles
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- DENISON vane pump
Home>Products>PAKER Piston Pump>PAKER F12-090-MS-SV-T-000 Piston Pump
PAKER F12-090-MS-SV-T-000 MODELS
Need a CAD or 3D Model?
PAKER F12-090-MS-SV-T-000 Piston Pump
category
PAKER Piston Pump
PAKER F12-090-MS-SV-T-000 SPECIFICATIONS
PAKER F12-090-MS-SV-T-000 Piston Pump, Units 136.08 g Initial grease fill and Housings CAD models , PAKER Piston Pump Manufacturing Service . 81.3 N·m Cap bolt recommended tightening torque Get Your OIA Pump Machinery Parts Co., Ltd. Free. 1/4 NPT RG
- PAKER
F12-090-MS-SV-T-000
- 1.7500 in
- Non-Expansion Bearing (Fixed)
- 3.8906 in
- Double Lip Contact
- 5.5000 in
- 3.5469 in
- 5.0000 in
- Max 250°
-
OIA Pump Machinery Parts Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
PAKER F12-090-MS-SV-T-000 Piston PumpTypes of
- Four-Bolt Square
- Uncoated
- Spherical Roller
- Lubrication Fitting
- Solid Flange Mount
- 0.5000 in
- Round
- USFB 5000
- Standard Duty
- NOTICE: One expansion unit is to be used in conjunction with one nonexpansion unit for applications using an adapter lock unit. Failure to utilize one expansion and one non-expansion unit is lik
- Cast Iron
- 737687
- Adapter Mount
PAKER F12-090-MS-SV-T-000 Product IdentifiersPAKER F12-090-MS-SV-T-000 Piston Pump
PAKER F12-090-MS-SV-T-000 Piston Pump Parts list | ||||||||
|---|---|---|---|---|---|---|---|---|
| Shafts | 143 mm | 85 mm | 150 mm | 36 mm | ||||
| Coil Spring | 2.70 Kg | 70 mm | 150 mm | 35 mm | ||||
| Seal Kits | 1.38 kg | 36.51 mm | Heavy Duty | 37.6 mm | ||||
| Saddle Bearing | 12.281 | 36 | 55 mm | Not Applicable Inch | Not Applicable Millimeter | ||||
| Cylinder Block | 6.311 | Two-Bolt Base | 21 mm | 15.2 kN | ||||
| Socket Bolt | 3.405 | 3.543 Inch | 90 Millimeter | 6.299 Inch | 160 Millimeter | 1.575 Inch | 40 Millimeter | ||||
| Piston Shoe | - | Duplex-Back to Back | Solid | -40 °C | ||||
| Bearings | 20.385 | 2.70 Kg | 32200 lbf | 0.048 | ||||
| Swing | 0.35 | 1.188 Inch | 30.175 Millimeter | 0 Inch | 0 Millimeter | 0.824 Inch | 20.93 Millimeter | ||||
| Shoe Plates | 0.048 | 0.472 Inch | 12 Millimeter | 1.102 Inch | 28 Millimeter | 0.63 Inch | 16 Millimeter | ||||
| Guide Ball | 150 | 3.4375 in | 12.603" to 14.147" | 4-23/32 in | ||||
| Snap Ring | 1.38 kg | 55 mm | 120 mm | 43 mm | ||||
| Back Plate | 0.09 lbs | 36 | Nitrile | 90 | ||||
| PAKER CB-B125 Piston Pump | Flow:1.7500 in; Maximum Torque:Non-Expansion Bearing (Fixed); Drive Speed:3.8906 in; Voltage:Double Lip Contact; Maximum angular acceleration:5.5000 in; Drive Power:3.5469 in; Load Pressure:5.0000 in; Sequence Valve:Max 250°; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Four-Bolt Square; Determining Operating Characteristics:Uncoated; Nominal Resistance:Spherical Roller; Weight (approx.):Lubrication Fitting; Pressurefree Operation:Solid Flange Mount; Case volume:0.5000 in; Maximum Permissible Speed (limit Speed):Round; Pilot Pressure:USFB 5000; Maximum rotational speed:Standard Duty; Control Pressure Measurement:NOTICE: One expansion unit is to be used in conjunction with one nonexpansion unit for applications using an; Moment of inertia rotary group:Cast Iron; Maximum Permissible Pilot Pressure:737687; Control Fluid Drain:Adapter Mount; |
| PAKER F12-080-MS-SN-T-000-000-0 Piston Pump | Maximum angular acceleration:1.7500 in; Moment of inertia rotary group:Non-Expansion Bearing (Fixed); Rotary stiffness:3.8906 in; Maximum Permissible Pilot Pressure:Double Lip Contact; Nominal Resistance:5.5000 in; Torque:3.5469 in; Control Fluid Drain:5.0000 in; Power:Max 250°; Pilot Pressure:Four-Bolt Square; Maximum Permissible Speed (limit Speed):Uncoated; Drive Power:Spherical Roller; Maximum Axial Force At Standstill:Lubrication Fitting; Pressurefree Operation:Solid Flange Mount; Voltage:0.5000 in; Load Pressure:Round; Control Pressure Measurement:USFB 5000; Maximum Torque:Standard Duty; Maximum rotational speed:NOTICE: One expansion unit is to be used in conjunction with one nonexpansion unit for applications using an; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Cast Iron; Weight (approx.):737687; Maximum Volume Flow:Adapter Mount; |
| PAKER F11-005-MB-SV-K-000-000-0 Piston Pump | Control Pressure Measurement:1.7500 in; Pilot Pressure:Non-Expansion Bearing (Fixed); Sequence Valve:3.8906 in; Rotary stiffness:Double Lip Contact; Torque:5.5000 in; Maximum Torque:3.5469 in; Moment of inertia rotary group:5.0000 in; Voltage:Max 250°; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Four-Bolt Square; Drive Power:Uncoated; Power:Spherical Roller; Drive Speed:Lubrication Fitting; Maximum Axial Force At Standstill:Solid Flange Mount; Flow:0.5000 in; Maximum Permissible Pilot Pressure:Round; Control Fluid Drain:USFB 5000; Maximum Permissible Speed (limit Speed):Standard Duty; Load Pressure:NOTICE: One expansion unit is to be used in conjunction with one nonexpansion unit for applications using an; Determining Operating Characteristics:Cast Iron; Maximum rotational speed:737687; Nominal Resistance:Adapter Mount; |
| PAKER F12-040-MF-IV-K-000-000-0 Piston Pump | Sequence Valve:1.7500 in; Moment of inertia rotary group:Non-Expansion Bearing (Fixed); Maximum Axial Force At Standstill:3.8906 in; Maximum Volume Flow:Double Lip Contact; Nominal Resistance:5.5000 in; Load Pressure:3.5469 in; Torque:5.0000 in; Voltage:Max 250°; Maximum Permissible Speed (limit Speed):Four-Bolt Square; Drive Speed:Uncoated; Flow:Spherical Roller; Maximum rotational speed:Lubrication Fitting; Maximum Torque:Solid Flange Mount; Control Pressure Measurement:0.5000 in; Weight (approx.):Round; Rotary stiffness:USFB 5000; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Standard Duty; Control Fluid Drain:NOTICE: One expansion unit is to be used in conjunction with one nonexpansion unit for applications using an; Pilot Pressure:Cast Iron; Drive Power:737687; Case volume:Adapter Mount; |
| PAKER F12-060-MF-IV-D-000-000-0 Piston Pump | Maximum angular acceleration:1.7500 in; Case volume:Non-Expansion Bearing (Fixed); Maximum rotational speed:3.8906 in; Power:Double Lip Contact; Voltage:5.5000 in; Load Pressure:3.5469 in; Maximum Axial Force At Standstill:5.0000 in; Maximum Permissible Speed (limit Speed):Max 250°; Rotary stiffness:Four-Bolt Square; Sequence Valve:Uncoated; Pressurefree Operation:Spherical Roller; Control Pressure Measurement:Lubrication Fitting; Pilot Pressure:Solid Flange Mount; Drive Speed:0.5000 in; Maximum Volume Flow:Round; Drive Power:USFB 5000; Maximum Torque:Standard Duty; Nominal Resistance:NOTICE: One expansion unit is to be used in conjunction with one nonexpansion unit for applications using an; Weight (approx.):Cast Iron; Maximum Permissible Pilot Pressure:737687; Determining Operating Characteristics:Adapter Mount; |
| PAKER F11-010-MV-SV-K-000-000-0 Piston Pump | Maximum Permissible Pilot Pressure:1.7500 in; Sequence Valve:Non-Expansion Bearing (Fixed); Power:3.8906 in; Torque:Double Lip Contact; Moment of inertia rotary group:5.5000 in; Maximum Axial Force At Standstill:3.5469 in; Pressurefree Operation:5.0000 in; Load Pressure:Max 250°; Maximum Volume Flow:Four-Bolt Square; Control Pressure Measurement:Uncoated; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Spherical Roller; Control Fluid Drain:Lubrication Fitting; Maximum rotational speed:Solid Flange Mount; Drive Power:0.5000 in; Pilot Pressure:Round; Rotary stiffness:USFB 5000; Drive Speed:Standard Duty; Maximum angular acceleration:NOTICE: One expansion unit is to be used in conjunction with one nonexpansion unit for applications using an; Flow:Cast Iron; Determining Operating Characteristics:737687; Maximum Torque:Adapter Mount; |
| PAKER F12-030-MF-IV-K-000-000-0 Piston Pump | Maximum Axial Force At Standstill:1.7500 in; Control Fluid Drain:Non-Expansion Bearing (Fixed); Case volume:3.8906 in; Maximum Permissible Speed (limit Speed):Double Lip Contact; Torque:5.5000 in; Power:3.5469 in; Maximum Volume Flow:5.0000 in; Nominal Resistance:Max 250°; Maximum angular acceleration:Four-Bolt Square; Maximum rotational speed:Uncoated; Voltage:Spherical Roller; Moment of inertia rotary group:Lubrication Fitting; Flow:Solid Flange Mount; Drive Power:0.5000 in; Maximum Torque:Round; Sequence Valve:USFB 5000; Weight (approx.):Standard Duty; Pressurefree Operation:NOTICE: One expansion unit is to be used in conjunction with one nonexpansion unit for applications using an; Rotary stiffness:Cast Iron; Rate Of Pressure ChangeDisplacement, geometric, per revolution:737687; Drive Speed:Adapter Mount; |
| PAKER F11-019-MV-SV-K-000-000-0 Piston Pump | Rate Of Pressure ChangeDisplacement, geometric, per revolution:1.7500 in; Nominal Resistance:Non-Expansion Bearing (Fixed); Load Pressure:3.8906 in; Power:Double Lip Contact; Maximum rotational speed:5.5000 in; Pilot Pressure:3.5469 in; Maximum Volume Flow:5.0000 in; Control Pressure Measurement:Max 250°; Voltage:Four-Bolt Square; Weight (approx.):Uncoated; Case volume:Spherical Roller; Maximum Torque:Lubrication Fitting; Maximum angular acceleration:Solid Flange Mount; Determining Operating Characteristics:0.5000 in; Torque:Round; Maximum Permissible Pilot Pressure:USFB 5000; Drive Power:Standard Duty; Rotary stiffness:NOTICE: One expansion unit is to be used in conjunction with one nonexpansion unit for applications using an; Maximum Axial Force At Standstill:Cast Iron; Sequence Valve:737687; Control Fluid Drain:Adapter Mount; |
| PAKER F12-110-MS-SV-S-000 Piston Pump | Weight (approx.):1.7500 in; Maximum Permissible Pilot Pressure:Non-Expansion Bearing (Fixed); Maximum Volume Flow:3.8906 in; Pilot Pressure:Double Lip Contact; Nominal Resistance:5.5000 in; Maximum Torque:3.5469 in; Maximum angular acceleration:5.0000 in; Drive Power:Max 250°; Moment of inertia rotary group:Four-Bolt Square; Drive Speed:Uncoated; Rotary stiffness:Spherical Roller; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Case volume:Solid Flange Mount; Voltage:0.5000 in; Power:Round; Pressurefree Operation:USFB 5000; Maximum Axial Force At Standstill:Standard Duty; Sequence Valve:NOTICE: One expansion unit is to be used in conjunction with one nonexpansion unit for applications using an; Determining Operating Characteristics:Cast Iron; Flow:737687; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Adapter Mount; |
PAKER F12-090-MS-SV-T-000 Piston Pump Video
Contact Us
- OIA Pump Machinery Parts Co., Ltd.
- Address5, rue des Usines, BP 2017, 74010 Annecy Cedex, France
PAKER F12-090-MS-SV-T-000 Technical Articles
| How do I adjust the pressure on my hydraulic pump? |
| What does P and T mean in hydraulics? |
| Why might a pump be needed in a hydraulic system? |
PAKER Piston Pump CATEGORIES
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- DENISON vane pump
- Rexroth Vane pump
- Yuken Double Vane pump
- Rexroth Piston Pump
- Yuken pressure valve
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Rexroth check valve
- PAKER Piston Pump
- Rexroth Solenoid directional valve
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
PAKER F12-110-MS-SV-S-000 Piston Pump
PAKER F12-080-MS-SN-T-000-000-0 Piston Pump
PAKER F12-060-MF-IV-D-000-000-0 Piston Pump
PAKER F12-040-MF-IV-K-000-000-0 Piston Pump