English- Home
- Stock Categories
- Technical Articles
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- DENISON vane pump
Home>Products>CAT injector>CAT 10R-7662 injector
CAT 10R-7662 injector
category
CAT injector
CAT 10R-7662 SPECIFICATIONS
What is the best place to buy CAT 10R-7662 injector online? CAT injector 782475990078 UPC Manufacturing 4.72 LB Ship Weight Service OIA Pump Machinery Parts Co., Ltd. .
- CAT
10R-7662
- 60 mm
- Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s
- 74 mm
- 29;Static 150 N/mm2
- 48 mm
- Dry 0.50;Periodic lubrication 1.0 m/s
- 110 mm
- 500SP1 SL1
-
OIA Pump Machinery Parts Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product featuresCAT 10R-7662 injector
- Flanged Bearing
- RoHS
- 8 mm
- SPFG
- OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant
- Lead Free
- Periodic Lubrication -40 to +302 °F, Dry -40 to +572
CAT 10R-7662 Products and servicesCAT 10R-7662 injector
CAT 10R-7662 injector Parts list | ||||||||
|---|---|---|---|---|---|---|---|---|
| Piston Shoe | 95 mm | 200 mm | 45 mm | 215 mm | ||||
| Guide Ball | 80,000 mm | 105,000 mm | Cast Iron | 2.34 kg | ||||
| Gear Pump | 49.21 mm | 320 kN | 49.2 mm | 2.34 kg | ||||
| Valve Plate | 1.938 Inch | 49.225 Millimeter | 1.75 Inch | 44.45 Millimeter | Single Lip Contact | 2.747 | ||||
| Oil Distribution Disc Plug | 23.2 kN | 35 mm | 2.747 | Cast Iron | ||||
| Pump Right Rotating Group | 94 mm | 157 mm | 8640 r/min | 24.462 | ||||
| Coil Spring | Nitrile | 80 | 1.38 KGS | 11.3 | ||||
| Skeleton Oil Seal | 35 | 4 Bolt Square Flange Block | Cylindrical Bore | 0.075 Kg | ||||
| Ball Guides | 55mm | 120mm | 29mm | 190 mm | ||||
| Pressure Plate | 3,4988 mm | 59,131 mm | 16,637 mm | 24.462 | ||||
| Swash Plate Assy | 35 mm | 80 mm | 22,403 mm | 32 kN | ||||
| Rod | 100 mm | 215 mm | 47 mm | 8 Nm | ||||
| Press Pin | 360 kN | Yes | 2.34 kg | 0.95 lbs | ||||
| CAT 243-4502 injector | Nominal Resistance:60 mm; Load Pressure:Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s; Maximum Torque:74 mm; Maximum Axial Force At Standstill:29;Static 150 N/mm2; Maximum Volume Flow:48 mm; Weight (approx.):Dry 0.50;Periodic lubrication 1.0 m/s; Control Pressure Measurement:110 mm; Pilot Pressure:500SP1 SL1; Determining Operating Characteristics:Flanged Bearing; Case volume:RoHS; Torque:8 mm; Rotary stiffness:SPFG; Maximum angular acceleration:OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant; Maximum rotational speed:Lead Free; Sequence Valve:Periodic Lubrication -40 to +302 °F, Dry -40 to +572; |
| CAT 387-9430 injector | Control Pressure Measurement:60 mm; Maximum Permissible Speed (limit Speed):Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s; Power:74 mm; Flow:29;Static 150 N/mm2; Rotary stiffness:48 mm; Case volume:Dry 0.50;Periodic lubrication 1.0 m/s; Sequence Valve:110 mm; Voltage:500SP1 SL1; Drive Speed:Flanged Bearing; Nominal Resistance:RoHS; Pressurefree Operation:8 mm; Maximum Volume Flow:SPFG; Control Fluid Drain:OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant; Maximum angular acceleration:Lead Free; Drive Power:Periodic Lubrication -40 to +302 °F, Dry -40 to +572; |
| CAT 269-1839 injector | Flow:60 mm; Voltage:Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s; Maximum Torque:74 mm; Drive Power:29;Static 150 N/mm2; Maximum Volume Flow:48 mm; Maximum angular acceleration:Dry 0.50;Periodic lubrication 1.0 m/s; Case volume:110 mm; Drive Speed:500SP1 SL1; Maximum rotational speed:Flanged Bearing; Nominal Resistance:RoHS; Control Pressure Measurement:8 mm; Sequence Valve:SPFG; Pressurefree Operation:OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Lead Free; Maximum Permissible Speed (limit Speed):Periodic Lubrication -40 to +302 °F, Dry -40 to +572; |
| CAT 328-2585 injector | Sequence Valve:60 mm; Voltage:Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s; Control Pressure Measurement:74 mm; Maximum Permissible Pilot Pressure:29;Static 150 N/mm2; Load Pressure:48 mm; Determining Operating Characteristics:Dry 0.50;Periodic lubrication 1.0 m/s; Maximum Volume Flow:110 mm; Maximum rotational speed:500SP1 SL1; Flow:Flanged Bearing; Moment of inertia rotary group:RoHS; Maximum Torque:8 mm; Nominal Resistance:SPFG; Pressurefree Operation:OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant; Drive Power:Lead Free; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Periodic Lubrication -40 to +302 °F, Dry -40 to +572; |
| CAT 387-9427 injector | Flow:60 mm; Drive Speed:Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s; Maximum Volume Flow:74 mm; Pressurefree Operation:29;Static 150 N/mm2; Power:48 mm; Maximum Axial Force At Standstill:Dry 0.50;Periodic lubrication 1.0 m/s; Sequence Valve:110 mm; Pilot Pressure:500SP1 SL1; Moment of inertia rotary group:Flanged Bearing; Maximum Permissible Speed (limit Speed):RoHS; Nominal Resistance:8 mm; Control Pressure Measurement:SPFG; Weight (approx.):OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant; Load Pressure:Lead Free; Maximum rotational speed:Periodic Lubrication -40 to +302 °F, Dry -40 to +572; |
| CAT 238-8901 injector | Pilot Pressure:60 mm; Flow:Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s; Maximum Axial Force At Standstill:74 mm; Maximum rotational speed:29;Static 150 N/mm2; Maximum Permissible Pilot Pressure:48 mm; Maximum Torque:Dry 0.50;Periodic lubrication 1.0 m/s; Voltage:110 mm; Maximum Permissible Speed (limit Speed):500SP1 SL1; Moment of inertia rotary group:Flanged Bearing; Control Fluid Drain:RoHS; Case volume:8 mm; Torque:SPFG; Power:OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant; Rotary stiffness:Lead Free; Drive Power:Periodic Lubrication -40 to +302 °F, Dry -40 to +572; |
| CAT 10R-7225 injector | Control Fluid Drain:60 mm; Drive Power:Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s; Maximum Torque:74 mm; Rate Of Pressure ChangeDisplacement, geometric, per revolution:29;Static 150 N/mm2; Case volume:48 mm; Rotary stiffness:Dry 0.50;Periodic lubrication 1.0 m/s; Torque:110 mm; Pressurefree Operation:500SP1 SL1; Nominal Resistance:Flanged Bearing; Pilot Pressure:RoHS; Weight (approx.):8 mm; Control Pressure Measurement:SPFG; Determining Operating Characteristics:OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant; Drive Speed:Lead Free; Maximum angular acceleration:Periodic Lubrication -40 to +302 °F, Dry -40 to +572; |
| CAT 328-2586 injector | Power:60 mm; Pilot Pressure:Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s; Control Fluid Drain:74 mm; Maximum Permissible Speed (limit Speed):29;Static 150 N/mm2; Maximum angular acceleration:48 mm; Control Pressure Measurement:Dry 0.50;Periodic lubrication 1.0 m/s; Rate Of Pressure ChangeDisplacement, geometric, per revolution:110 mm; Voltage:500SP1 SL1; Maximum Permissible Pilot Pressure:Flanged Bearing; Moment of inertia rotary group:RoHS; Sequence Valve:8 mm; Case volume:SPFG; Maximum Axial Force At Standstill:OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant; Maximum Torque:Lead Free; Torque:Periodic Lubrication -40 to +302 °F, Dry -40 to +572; |
| CAT 241-3239 injector | Drive Speed:60 mm; Sequence Valve:Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s; Rotary stiffness:74 mm; Weight (approx.):29;Static 150 N/mm2; Voltage:48 mm; Moment of inertia rotary group:Dry 0.50;Periodic lubrication 1.0 m/s; Case volume:110 mm; Pilot Pressure:500SP1 SL1; Torque:Flanged Bearing; Drive Power:RoHS; Maximum Axial Force At Standstill:8 mm; Maximum rotational speed:SPFG; Maximum Torque:OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant; Determining Operating Characteristics:Lead Free; Load Pressure:Periodic Lubrication -40 to +302 °F, Dry -40 to +572; |
| CAT 387-9428 injector | Drive Speed:60 mm; Maximum rotational speed:Dry 1.65, Periodic Lubrication 3.25N/mm2 x m/s; Case volume:74 mm; Pressurefree Operation:29;Static 150 N/mm2; Rate Of Pressure ChangeDisplacement, geometric, per revolution:48 mm; Sequence Valve:Dry 0.50;Periodic lubrication 1.0 m/s; Rotary stiffness:110 mm; Maximum Axial Force At Standstill:500SP1 SL1; Torque:Flanged Bearing; Flow:RoHS; Pilot Pressure:8 mm; Weight (approx.):SPFG; Determining Operating Characteristics:OILES 500SP1 SL1 High-strength Brass with Embedded Solid Lubricant; Nominal Resistance:Lead Free; Maximum Volume Flow:Periodic Lubrication -40 to +302 °F, Dry -40 to +572; |
CAT 10R-7662 injector Video
Contact Us
- OIA Pump Machinery Parts Co., Ltd.
- Address5, rue des Usines, BP 2017, 74010 Annecy Cedex, France
CAT 10R-7662 Technical Articles
| How do I adjust the pressure on my hydraulic pump? |
| What does P and T mean in hydraulics? |
| Why might a pump be needed in a hydraulic system? |
CAT injector CATEGORIES
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- DENISON vane pump
- Rexroth Vane pump
- Yuken Double Vane pump
- Rexroth Piston Pump
- Yuken pressure valve
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Rexroth check valve
- PAKER Piston Pump
- Rexroth Solenoid directional valve
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
CAT 387-9427 injector
CAT 10R-7225 injector
CAT 387-9430 injector
CAT 328-2585 injector
CAT 387-9428 injector