Home>Products>BOSCH injector>BOSCH 0445110038 injector
BOSCH 0445110038 injector
category
BOSCH injector
BOSCH 0445110038 SPECIFICATIONS
BOSCH 0445110038 injector Engineering Calculator Pillow Block Category , 4 Bolt Pillow Block Housing Style BOSCH injector OIA Pump Machinery Parts Co., Ltd. Manufacturing Service . Get Your Free.
- BOSCH
0445110038
- NUP2312
- 60x130x46
- 60
- 130
- 46
- 60 mm
- 77 mm
- 130 mm
- OIA Pump Machinery Parts Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Technical informationBOSCH 0445110038 injector
- 46 mm
- 46 mm
- 2.1 mm
- 2.1 mm
- 2.69 Kg
- 168 kN
- 188 kN
- 4200 r/min
- NUP2312
- 2.1
- 2.1
- 211
- 188
- 29.4
- 4200
- 6300
- -
- -
- -
- -
- 71
- 71
- 75
- -
- -
- 119
- -
- -
- 2
- 2
- 2.85
BOSCH 0445110038 Product IdentifiersBOSCH 0445110038 injector
BOSCH 0445110038 injector Parts list | ||||||||
---|---|---|---|---|---|---|---|---|
Regulator | http://www.timken.com | 1 in | 0,039 Kg | Inch | ||||
Piston Sets | 200,025 mm | 142,875 mm | 3,82 Kg | Non-expansion | ||||
Push Rod | 6.252 Inch | 158.8 Millimeter | 4.528 Inch | 115 Millimeter | 46.308 | 0.0 | ||||
Inclined Plate | 3.23 Inch | 82.042 Millimeter | 2.953 Inch | 75 Millimeter | 13.62 | 0.0 | ||||
Drive Shaft | 3.75 Inch | 95.25 Millimeter | 1.5 Inch | 38.1 Millimeter | 2.166 | 0.0 | ||||
Variable Piston | 3/32 in | 13.62 | 0.029 | 0.0 | ||||
Back Plate | 9.27 to 10-1/4 in | 2.4375 in | 90068 | 3.5 | ||||
Cylinder Blocks | 31/32 in | 1/2 in | 270 | 1 Inch | 25.4 Millimeter | ||||
Oil Distribution Plate | 150 | Flanged | 0.02 Kg | 2.563 Inch | 65.1 Millimeter | ||||
Barrel Washer | 3/32 in | 1.19 | Lubrication Fitting | 45 mm | ||||
Coil Spring | 24mm | 8mm | Non-expansion | 460 | ||||
Ball Joint | 270 mm | 150 mm | 185.161 | 150 | ||||
Cylinder | With Pilot | 39,688 mm | 0.23 lbs | - |
BOSCH 0445110209 injector | Determining Operating Characteristics:NUP2312; Pressurefree Operation:60x130x46; Power:60; Torque:130; Maximum Volume Flow:46; Maximum rotational speed:60 mm; Moment of inertia rotary group:77 mm; Case volume:130 mm; Maximum Permissible Speed (limit Speed):46 mm; Maximum angular acceleration:46 mm; Control Pressure Measurement:2.1 mm; Load Pressure:2.1 mm; Drive Speed:2.69 Kg; Maximum Torque:168 kN; Nominal Resistance:188 kN; Drive Power:4200 r/min; Sequence Valve:NUP2312; Rate Of Pressure ChangeDisplacement, geometric, per revolution:2.1; Voltage:2.1; Maximum Permissible Pilot Pressure:211; Weight (approx.):188; Flow:29.4; Grease lub.:4200; Oil lub.:6300; Ew:-; d1:-; B1:-; B2:-; da(min):71; db(min):71; db(max):75; dc(min):-; dd(min):-; Da(max):119; Db(max):-; Db(min):-; ra(max):2; rb(max):2; (Refer.)Mass(kg):2.85; |
BOSCH 0445110517 injector | Moment of inertia rotary group:NUP2312; Torque:60x130x46; Weight (approx.):60; Pressurefree Operation:130; Maximum Permissible Speed (limit Speed):46; Power:60 mm; Maximum Permissible Pilot Pressure:77 mm; Maximum Torque:130 mm; Determining Operating Characteristics:46 mm; Control Pressure Measurement:46 mm; Control Fluid Drain:2.1 mm; Maximum Volume Flow:2.1 mm; Maximum angular acceleration:2.69 Kg; Maximum Axial Force At Standstill:168 kN; Rotary stiffness:188 kN; Flow:4200 r/min; Rate Of Pressure ChangeDisplacement, geometric, per revolution:NUP2312; Load Pressure:2.1; Nominal Resistance:2.1; Pilot Pressure:211; Drive Power:188; Drive Speed:29.4; Grease lub.:4200; Oil lub.:6300; Ew:-; d1:-; B1:-; B2:-; da(min):71; db(min):71; db(max):75; dc(min):-; dd(min):-; Da(max):119; Db(max):-; Db(min):-; ra(max):2; rb(max):2; (Refer.)Mass(kg):2.85; |
BOSCH 0445110433 injector | Maximum Torque:NUP2312; Case volume:60x130x46; Pilot Pressure:60; Maximum Permissible Speed (limit Speed):130; Sequence Valve:46; Maximum Axial Force At Standstill:60 mm; Flow:77 mm; Rotary stiffness:130 mm; Moment of inertia rotary group:46 mm; Rate Of Pressure ChangeDisplacement, geometric, per revolution:46 mm; Control Pressure Measurement:2.1 mm; Torque:2.1 mm; Power:2.69 Kg; Control Fluid Drain:168 kN; Determining Operating Characteristics:188 kN; Nominal Resistance:4200 r/min; Voltage:NUP2312; Maximum rotational speed:2.1; Maximum Volume Flow:2.1; Maximum Permissible Pilot Pressure:211; Drive Speed:188; Pressurefree Operation:29.4; Grease lub.:4200; Oil lub.:6300; Ew:-; d1:-; B1:-; B2:-; da(min):71; db(min):71; db(max):75; dc(min):-; dd(min):-; Da(max):119; Db(max):-; Db(min):-; ra(max):2; rb(max):2; (Refer.)Mass(kg):2.85; |
BOSCH 0445110475 injector | Maximum rotational speed:NUP2312; Case volume:60x130x46; Moment of inertia rotary group:60; Drive Speed:130; Rate Of Pressure ChangeDisplacement, geometric, per revolution:46; Power:60 mm; Maximum Permissible Speed (limit Speed):77 mm; Maximum Volume Flow:130 mm; Maximum Axial Force At Standstill:46 mm; Control Fluid Drain:46 mm; Maximum Permissible Pilot Pressure:2.1 mm; Torque:2.1 mm; Maximum angular acceleration:2.69 Kg; Drive Power:168 kN; Nominal Resistance:188 kN; Pilot Pressure:4200 r/min; Maximum Torque:NUP2312; Sequence Valve:2.1; Voltage:2.1; Control Pressure Measurement:211; Flow:188; Rotary stiffness:29.4; Grease lub.:4200; Oil lub.:6300; Ew:-; d1:-; B1:-; B2:-; da(min):71; db(min):71; db(max):75; dc(min):-; dd(min):-; Da(max):119; Db(max):-; Db(min):-; ra(max):2; rb(max):2; (Refer.)Mass(kg):2.85; |
BOSCH 0445110541 injector | Drive Power:NUP2312; Power:60x130x46; Load Pressure:60; Determining Operating Characteristics:130; Maximum rotational speed:46; Pilot Pressure:60 mm; Rotary stiffness:77 mm; Pressurefree Operation:130 mm; Maximum Permissible Pilot Pressure:46 mm; Maximum Torque:46 mm; Maximum Volume Flow:2.1 mm; Control Fluid Drain:2.1 mm; Maximum Axial Force At Standstill:2.69 Kg; Control Pressure Measurement:168 kN; Maximum angular acceleration:188 kN; Flow:4200 r/min; Voltage:NUP2312; Rate Of Pressure ChangeDisplacement, geometric, per revolution:2.1; Sequence Valve:2.1; Weight (approx.):211; Nominal Resistance:188; Case volume:29.4; Grease lub.:4200; Oil lub.:6300; Ew:-; d1:-; B1:-; B2:-; da(min):71; db(min):71; db(max):75; dc(min):-; dd(min):-; Da(max):119; Db(max):-; Db(min):-; ra(max):2; rb(max):2; (Refer.)Mass(kg):2.85; |
BOSCH 0445110383 injector | Weight (approx.):NUP2312; Drive Power:60x130x46; Moment of inertia rotary group:60; Determining Operating Characteristics:130; Torque:46; Maximum Permissible Speed (limit Speed):60 mm; Maximum Permissible Pilot Pressure:77 mm; Case volume:130 mm; Flow:46 mm; Nominal Resistance:46 mm; Load Pressure:2.1 mm; Maximum Axial Force At Standstill:2.1 mm; Maximum Volume Flow:2.69 Kg; Pressurefree Operation:168 kN; Drive Speed:188 kN; Maximum Torque:4200 r/min; Power:NUP2312; Rate Of Pressure ChangeDisplacement, geometric, per revolution:2.1; Control Fluid Drain:2.1; Maximum rotational speed:211; Voltage:188; Sequence Valve:29.4; Grease lub.:4200; Oil lub.:6300; Ew:-; d1:-; B1:-; B2:-; da(min):71; db(min):71; db(max):75; dc(min):-; dd(min):-; Da(max):119; Db(max):-; Db(min):-; ra(max):2; rb(max):2; (Refer.)Mass(kg):2.85; |
BOSCH 0445110474 injector | Moment of inertia rotary group:NUP2312; Maximum Permissible Pilot Pressure:60x130x46; Power:60; Pressurefree Operation:130; Control Pressure Measurement:46; Weight (approx.):60 mm; Maximum Axial Force At Standstill:77 mm; Load Pressure:130 mm; Maximum Permissible Speed (limit Speed):46 mm; Maximum rotational speed:46 mm; Voltage:2.1 mm; Maximum Volume Flow:2.1 mm; Maximum Torque:2.69 Kg; Determining Operating Characteristics:168 kN; Sequence Valve:188 kN; Torque:4200 r/min; Rate Of Pressure ChangeDisplacement, geometric, per revolution:NUP2312; Drive Power:2.1; Case volume:2.1; Drive Speed:211; Nominal Resistance:188; Pilot Pressure:29.4; Grease lub.:4200; Oil lub.:6300; Ew:-; d1:-; B1:-; B2:-; da(min):71; db(min):71; db(max):75; dc(min):-; dd(min):-; Da(max):119; Db(max):-; Db(min):-; ra(max):2; rb(max):2; (Refer.)Mass(kg):2.85; |
BOSCH 0445110629 injector | Maximum Permissible Pilot Pressure:NUP2312; Maximum Volume Flow:60x130x46; Maximum Permissible Speed (limit Speed):60; Rotary stiffness:130; Voltage:46; Weight (approx.):60 mm; Flow:77 mm; Moment of inertia rotary group:130 mm; Load Pressure:46 mm; Control Pressure Measurement:46 mm; Determining Operating Characteristics:2.1 mm; Maximum Axial Force At Standstill:2.1 mm; Pressurefree Operation:2.69 Kg; Maximum Torque:168 kN; Pilot Pressure:188 kN; Rate Of Pressure ChangeDisplacement, geometric, per revolution:4200 r/min; Control Fluid Drain:NUP2312; Case volume:2.1; Torque:2.1; Drive Speed:211; Maximum rotational speed:188; Sequence Valve:29.4; Grease lub.:4200; Oil lub.:6300; Ew:-; d1:-; B1:-; B2:-; da(min):71; db(min):71; db(max):75; dc(min):-; dd(min):-; Da(max):119; Db(max):-; Db(min):-; ra(max):2; rb(max):2; (Refer.)Mass(kg):2.85; |
BOSCH 0445110482 injector | Maximum Permissible Speed (limit Speed):NUP2312; Maximum rotational speed:60x130x46; Drive Speed:60; Maximum Permissible Pilot Pressure:130; Voltage:46; Rate Of Pressure ChangeDisplacement, geometric, per revolution:60 mm; Control Fluid Drain:77 mm; Nominal Resistance:130 mm; Weight (approx.):46 mm; Maximum Volume Flow:46 mm; Pilot Pressure:2.1 mm; Determining Operating Characteristics:2.1 mm; Maximum angular acceleration:2.69 Kg; Flow:168 kN; Maximum Torque:188 kN; Moment of inertia rotary group:4200 r/min; Rotary stiffness:NUP2312; Pressurefree Operation:2.1; Drive Power:2.1; Case volume:211; Maximum Axial Force At Standstill:188; Sequence Valve:29.4; Grease lub.:4200; Oil lub.:6300; Ew:-; d1:-; B1:-; B2:-; da(min):71; db(min):71; db(max):75; dc(min):-; dd(min):-; Da(max):119; Db(max):-; Db(min):-; ra(max):2; rb(max):2; (Refer.)Mass(kg):2.85; |
BOSCH 0445110575 injector | Control Fluid Drain:NUP2312; Maximum rotational speed:60x130x46; Maximum Volume Flow:60; Maximum Permissible Speed (limit Speed):130; Rotary stiffness:46; Weight (approx.):60 mm; Maximum Axial Force At Standstill:77 mm; Pressurefree Operation:130 mm; Control Pressure Measurement:46 mm; Sequence Valve:46 mm; Maximum angular acceleration:2.1 mm; Maximum Permissible Pilot Pressure:2.1 mm; Power:2.69 Kg; Drive Speed:168 kN; Pilot Pressure:188 kN; Torque:4200 r/min; Voltage:NUP2312; Load Pressure:2.1; Flow:2.1; Nominal Resistance:211; Moment of inertia rotary group:188; Case volume:29.4; Grease lub.:4200; Oil lub.:6300; Ew:-; d1:-; B1:-; B2:-; da(min):71; db(min):71; db(max):75; dc(min):-; dd(min):-; Da(max):119; Db(max):-; Db(min):-; ra(max):2; rb(max):2; (Refer.)Mass(kg):2.85; |
BOSCH 0445110038 injector Video
Contact Us
- OIA Pump Machinery Parts Co., Ltd.
- Address5, rue des Usines, BP 2017, 74010 Annecy Cedex, France
BOSCH 0445110038 Technical Articles
How do I adjust the pressure on my hydraulic pump? |
What does P and T mean in hydraulics? |
Why might a pump be needed in a hydraulic system? |
BOSCH injector CATEGORIES
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- DENISON vane pump
- Rexroth Vane pump
- Yuken Double Vane pump
- Rexroth Piston Pump
- Yuken pressure valve
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Rexroth check valve
- PAKER Piston Pump
- Rexroth Solenoid directional valve
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector