• |
  • Request a quote
English
English
OIA Pump Machinery Parts Co., Ltd.

OIA Pump Machinery Parts Co., Ltd.

 Rexroth PRESSURE RELIEF VALVE   Yuken Piston pump   DENISON vane pump  
  • Home
  • Stock Categories
    • Rexroth PRESSURE RELIEF VALVE
    • Yuken Piston pump
    • DENISON vane pump
    • Rexroth Vane pump
    • Yuken Double Vane pump
    • Rexroth Piston Pump
    • Yuken pressure valve
    • Danfoss Shut-off valves
    • Rexroth THROTTLE VALVE
    • Yuken single Vane pump
    • Rexroth check valve
    • PAKER Piston Pump
    • Rexroth Solenoid directional valve
    • CAT injector
    • BOSCH injector
    • CUMMINS injector
    • DEUTZ injector
    • COMMON RAIL injector
  • Technical Articles
  • Rexroth PRESSURE RELIEF VALVE
  • Yuken Piston pump
  • DENISON vane pump
✖

Home

Stock Categories

Technical Articles

Rexroth PRESSURE RELIEF VALVE

Yuken Piston pump

DENISON vane pump

Home>Products>CAT injector>CAT 10R7652 injector

  • CAT 10R7652 injector
  • CAT 10R7652 injector
  • CAT 10R7652 injector
  • CAT 10R7652 injector

CAT 10R7652 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

CAT 10R7652 injector

category

CAT injector

CAT 10R7652 SPECIFICATIONS

  • 100% Split Cylindrical Re Bearing Type Authentic. CAT 10R7652 injector 9-1/2 in Dimension H  Highest Quality. OIA Pump Machinery Parts Co., Ltd. Certified Supplier.

  • CAT

  • 10R7652

  • 6906ZENR
  • 30x47x9
  • 30
  • 47
  • 9
  • 30 mm
  • 47 mm
  • 9 mm
OIA Pump Machinery Parts Co., Ltd.

OIA Pump Machinery Parts Co., Ltd.China

  • OIA Pump Machinery Parts Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Product featuresCAT 10R7652 injector

  • 9 mm
  • 1.7 mm
  • 0.95 mm
  • 0.85 mm
  • 0.3 mm
  • 0.3 mm
  • 45.7 mm
  • 49.8 mm
  • 0.047 Kg
  • 7,25 kN
  • 5 kN
  • 14000 r/min
  • Single Shield with Snap Ring
  • Cylindrical Bore
  • Single Row
  • 30 mm
  • 47 mm
  • 9 mm
  • 0.3 mm
  • 0.3 mm
  • 0.9 mm
  • 49.8 mm
  • 45.7 mm
  • 1.7 mm
  • 1 mm
  • 7,250 N
  • 5,000 N
  • 14,000 rpm
  • 17,000 rpm
  • 15.8
  • 0.005 to 0.020 mm
  • 32 mm
  • 45 mm
  • 50.5 mm
  • 0.3 mm
  • 2.3 mm

CAT 10R7652 Products and servicesCAT 10R7652 injector

 

CAT 10R7652 injector Parts list

Coil SpringSolid Pillow Block2.5Spherical Roller Bearing68200
Swash Plate Assemblies105 mm160 mm26 mm99 kN
Pump Right Rotating Group63.5 mmPillow Type55 mm113.36 kN
Guide Ball6.693 Inch | 170 Millimeter12.205 Inch | 310 Millimeter4.331 Inch | 110 MillimeterF315-
Pressure PlateC3-Loose105Non-Expansion Bearing (Fixed)4.331 Inch | 110 Millimeter
Set Plate1.9375 in6.8800 to 7.1200 in0,8 mmMetric
Socket Bolt70C3-Loose95DuPont Krytox GPL 206
Back PlatePolymerLubrication Fitting5738 r/min2.5
Plunger Sliding Boots68200Solid Pillow Block76.8 kN25.4x61.912x19.05
Cylinder25,4 mm61,912 mm20,638 mm14,288 mm
Swash Plate AssySolidDouble Row61,912C3-Loose
Saddle BearingTapered Adapter SleeveOpen8.6700 inPolymer

 

CAT 238-8901 injectorControl Fluid Drain:6906ZENR; Voltage:30x47x9; Pressurefree Operation:30; Determining Operating Characteristics:47; Case volume:9; Maximum Volume Flow:30 mm; Torque:47 mm; Maximum angular acceleration:9 mm; Maximum Axial Force At Standstill:9 mm; Pilot Pressure:1.7 mm; Drive Power:0.95 mm; Flow:0.85 mm; Drive Speed:0.3 mm; Weight (approx.):0.3 mm; Load Pressure:45.7 mm; Maximum rotational speed:49.8 mm; Nominal Resistance:0.047 Kg; Sequence Valve:7,25 kN; Power:5 kN; Maximum Torque:14000 r/min; Maximum Permissible Pilot Pressure:Single Shield with Snap Ring; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Cylindrical Bore; Configuration:Single Row; Bore Size:30 mm; Outside Diameter:47 mm; Width:9 mm; Fillet Radius/Chamfer:0.3 mm; r1:0.3 mm; Snap Ring Width:0.9 mm; Snap Ring Outside Diameter:49.8 mm; D1 (max):45.7 mm; a (max):1.7 mm; b (min):1 mm; Dynamic Load Rating:7,250 N; Static Load Rating:5,000 N; Limiting Speed - Grease:14,000 rpm; Limiting Speed - Oil:17,000 rpm; Factor fo:15.8; Radial Clearance:0.005 to 0.020 mm; da (min):32 mm; Da (max):45 mm; Dx (min):50.5 mm; ra (max):0.3 mm; Cy (max):2.3 mm;
CAT 241-3239 injectorPower:6906ZENR; Maximum Torque:30x47x9; Sequence Valve:30; Torque:47; Maximum Permissible Speed (limit Speed):9; Drive Power:30 mm; Moment of inertia rotary group:47 mm; Load Pressure:9 mm; Flow:9 mm; Rate Of Pressure ChangeDisplacement, geometric, per revolution:1.7 mm; Drive Speed:0.95 mm; Rotary stiffness:0.85 mm; Maximum Axial Force At Standstill:0.3 mm; Case volume:0.3 mm; Nominal Resistance:45.7 mm; Determining Operating Characteristics:49.8 mm; Weight (approx.):0.047 Kg; Maximum angular acceleration:7,25 kN; Control Fluid Drain:5 kN; Pressurefree Operation:14000 r/min; Control Pressure Measurement:Single Shield with Snap Ring; Maximum Volume Flow:Cylindrical Bore; Configuration:Single Row; Bore Size:30 mm; Outside Diameter:47 mm; Width:9 mm; Fillet Radius/Chamfer:0.3 mm; r1:0.3 mm; Snap Ring Width:0.9 mm; Snap Ring Outside Diameter:49.8 mm; D1 (max):45.7 mm; a (max):1.7 mm; b (min):1 mm; Dynamic Load Rating:7,250 N; Static Load Rating:5,000 N; Limiting Speed - Grease:14,000 rpm; Limiting Speed - Oil:17,000 rpm; Factor fo:15.8; Radial Clearance:0.005 to 0.020 mm; da (min):32 mm; Da (max):45 mm; Dx (min):50.5 mm; ra (max):0.3 mm; Cy (max):2.3 mm;
CAT 387-9427 injectorPower:6906ZENR; Voltage:30x47x9; Control Pressure Measurement:30; Pilot Pressure:47; Maximum Axial Force At Standstill:9; Load Pressure:30 mm; Maximum Torque:47 mm; Pressurefree Operation:9 mm; Weight (approx.):9 mm; Determining Operating Characteristics:1.7 mm; Maximum Permissible Pilot Pressure:0.95 mm; Sequence Valve:0.85 mm; Rate Of Pressure ChangeDisplacement, geometric, per revolution:0.3 mm; Case volume:0.3 mm; Torque:45.7 mm; Drive Power:49.8 mm; Control Fluid Drain:0.047 Kg; Rotary stiffness:7,25 kN; Flow:5 kN; Maximum Volume Flow:14000 r/min; Drive Speed:Single Shield with Snap Ring; Maximum Permissible Speed (limit Speed):Cylindrical Bore; Configuration:Single Row; Bore Size:30 mm; Outside Diameter:47 mm; Width:9 mm; Fillet Radius/Chamfer:0.3 mm; r1:0.3 mm; Snap Ring Width:0.9 mm; Snap Ring Outside Diameter:49.8 mm; D1 (max):45.7 mm; a (max):1.7 mm; b (min):1 mm; Dynamic Load Rating:7,250 N; Static Load Rating:5,000 N; Limiting Speed - Grease:14,000 rpm; Limiting Speed - Oil:17,000 rpm; Factor fo:15.8; Radial Clearance:0.005 to 0.020 mm; da (min):32 mm; Da (max):45 mm; Dx (min):50.5 mm; ra (max):0.3 mm; Cy (max):2.3 mm;
CAT 328-2585 injectorRate Of Pressure ChangeDisplacement, geometric, per revolution:6906ZENR; Weight (approx.):30x47x9; Pilot Pressure:30; Control Pressure Measurement:47; Maximum rotational speed:9; Moment of inertia rotary group:30 mm; Torque:47 mm; Sequence Valve:9 mm; Drive Power:9 mm; Control Fluid Drain:1.7 mm; Maximum Permissible Pilot Pressure:0.95 mm; Drive Speed:0.85 mm; Maximum Volume Flow:0.3 mm; Nominal Resistance:0.3 mm; Case volume:45.7 mm; Maximum angular acceleration:49.8 mm; Flow:0.047 Kg; Maximum Permissible Speed (limit Speed):7,25 kN; Power:5 kN; Pressurefree Operation:14000 r/min; Voltage:Single Shield with Snap Ring; Maximum Axial Force At Standstill:Cylindrical Bore; Configuration:Single Row; Bore Size:30 mm; Outside Diameter:47 mm; Width:9 mm; Fillet Radius/Chamfer:0.3 mm; r1:0.3 mm; Snap Ring Width:0.9 mm; Snap Ring Outside Diameter:49.8 mm; D1 (max):45.7 mm; a (max):1.7 mm; b (min):1 mm; Dynamic Load Rating:7,250 N; Static Load Rating:5,000 N; Limiting Speed - Grease:14,000 rpm; Limiting Speed - Oil:17,000 rpm; Factor fo:15.8; Radial Clearance:0.005 to 0.020 mm; da (min):32 mm; Da (max):45 mm; Dx (min):50.5 mm; ra (max):0.3 mm; Cy (max):2.3 mm;
CAT 10R-7225 injectorMaximum Volume Flow:6906ZENR; Maximum Axial Force At Standstill:30x47x9; Torque:30; Drive Power:47; Nominal Resistance:9; Maximum rotational speed:30 mm; Maximum Torque:47 mm; Sequence Valve:9 mm; Maximum Permissible Pilot Pressure:9 mm; Maximum Permissible Speed (limit Speed):1.7 mm; Flow:0.95 mm; Case volume:0.85 mm; Determining Operating Characteristics:0.3 mm; Control Fluid Drain:0.3 mm; Control Pressure Measurement:45.7 mm; Power:49.8 mm; Pressurefree Operation:0.047 Kg; Load Pressure:7,25 kN; Rotary stiffness:5 kN; Voltage:14000 r/min; Drive Speed:Single Shield with Snap Ring; Pilot Pressure:Cylindrical Bore; Configuration:Single Row; Bore Size:30 mm; Outside Diameter:47 mm; Width:9 mm; Fillet Radius/Chamfer:0.3 mm; r1:0.3 mm; Snap Ring Width:0.9 mm; Snap Ring Outside Diameter:49.8 mm; D1 (max):45.7 mm; a (max):1.7 mm; b (min):1 mm; Dynamic Load Rating:7,250 N; Static Load Rating:5,000 N; Limiting Speed - Grease:14,000 rpm; Limiting Speed - Oil:17,000 rpm; Factor fo:15.8; Radial Clearance:0.005 to 0.020 mm; da (min):32 mm; Da (max):45 mm; Dx (min):50.5 mm; ra (max):0.3 mm; Cy (max):2.3 mm;
CAT 328-2586 injectorMoment of inertia rotary group:6906ZENR; Load Pressure:30x47x9; Determining Operating Characteristics:30; Pressurefree Operation:47; Maximum Torque:9; Torque:30 mm; Nominal Resistance:47 mm; Drive Power:9 mm; Rotary stiffness:9 mm; Control Fluid Drain:1.7 mm; Pilot Pressure:0.95 mm; Sequence Valve:0.85 mm; Control Pressure Measurement:0.3 mm; Voltage:0.3 mm; Case volume:45.7 mm; Maximum Permissible Pilot Pressure:49.8 mm; Power:0.047 Kg; Weight (approx.):7,25 kN; Drive Speed:5 kN; Rate Of Pressure ChangeDisplacement, geometric, per revolution:14000 r/min; Maximum rotational speed:Single Shield with Snap Ring; Maximum angular acceleration:Cylindrical Bore; Configuration:Single Row; Bore Size:30 mm; Outside Diameter:47 mm; Width:9 mm; Fillet Radius/Chamfer:0.3 mm; r1:0.3 mm; Snap Ring Width:0.9 mm; Snap Ring Outside Diameter:49.8 mm; D1 (max):45.7 mm; a (max):1.7 mm; b (min):1 mm; Dynamic Load Rating:7,250 N; Static Load Rating:5,000 N; Limiting Speed - Grease:14,000 rpm; Limiting Speed - Oil:17,000 rpm; Factor fo:15.8; Radial Clearance:0.005 to 0.020 mm; da (min):32 mm; Da (max):45 mm; Dx (min):50.5 mm; ra (max):0.3 mm; Cy (max):2.3 mm;
CAT 387-9430 injectorRate Of Pressure ChangeDisplacement, geometric, per revolution:6906ZENR; Maximum Volume Flow:30x47x9; Drive Power:30; Sequence Valve:47; Maximum Permissible Pilot Pressure:9; Torque:30 mm; Maximum Permissible Speed (limit Speed):47 mm; Maximum Axial Force At Standstill:9 mm; Maximum Torque:9 mm; Moment of inertia rotary group:1.7 mm; Nominal Resistance:0.95 mm; Power:0.85 mm; Drive Speed:0.3 mm; Control Fluid Drain:0.3 mm; Case volume:45.7 mm; Pressurefree Operation:49.8 mm; Maximum angular acceleration:0.047 Kg; Rotary stiffness:7,25 kN; Control Pressure Measurement:5 kN; Load Pressure:14000 r/min; Weight (approx.):Single Shield with Snap Ring; Voltage:Cylindrical Bore; Configuration:Single Row; Bore Size:30 mm; Outside Diameter:47 mm; Width:9 mm; Fillet Radius/Chamfer:0.3 mm; r1:0.3 mm; Snap Ring Width:0.9 mm; Snap Ring Outside Diameter:49.8 mm; D1 (max):45.7 mm; a (max):1.7 mm; b (min):1 mm; Dynamic Load Rating:7,250 N; Static Load Rating:5,000 N; Limiting Speed - Grease:14,000 rpm; Limiting Speed - Oil:17,000 rpm; Factor fo:15.8; Radial Clearance:0.005 to 0.020 mm; da (min):32 mm; Da (max):45 mm; Dx (min):50.5 mm; ra (max):0.3 mm; Cy (max):2.3 mm;
CAT 269-1839 injectorMaximum Axial Force At Standstill:6906ZENR; Moment of inertia rotary group:30x47x9; Maximum Torque:30; Case volume:47; Control Pressure Measurement:9; Drive Speed:30 mm; Flow:47 mm; Pressurefree Operation:9 mm; Maximum Permissible Speed (limit Speed):9 mm; Maximum rotational speed:1.7 mm; Maximum Permissible Pilot Pressure:0.95 mm; Rate Of Pressure ChangeDisplacement, geometric, per revolution:0.85 mm; Maximum Volume Flow:0.3 mm; Determining Operating Characteristics:0.3 mm; Torque:45.7 mm; Weight (approx.):49.8 mm; Drive Power:0.047 Kg; Pilot Pressure:7,25 kN; Load Pressure:5 kN; Power:14000 r/min; Maximum angular acceleration:Single Shield with Snap Ring; Control Fluid Drain:Cylindrical Bore; Configuration:Single Row; Bore Size:30 mm; Outside Diameter:47 mm; Width:9 mm; Fillet Radius/Chamfer:0.3 mm; r1:0.3 mm; Snap Ring Width:0.9 mm; Snap Ring Outside Diameter:49.8 mm; D1 (max):45.7 mm; a (max):1.7 mm; b (min):1 mm; Dynamic Load Rating:7,250 N; Static Load Rating:5,000 N; Limiting Speed - Grease:14,000 rpm; Limiting Speed - Oil:17,000 rpm; Factor fo:15.8; Radial Clearance:0.005 to 0.020 mm; da (min):32 mm; Da (max):45 mm; Dx (min):50.5 mm; ra (max):0.3 mm; Cy (max):2.3 mm;
CAT 243-4502 injectorDrive Speed:6906ZENR; Maximum Axial Force At Standstill:30x47x9; Maximum angular acceleration:30; Control Fluid Drain:47; Maximum Permissible Pilot Pressure:9; Weight (approx.):30 mm; Power:47 mm; Rotary stiffness:9 mm; Maximum Torque:9 mm; Control Pressure Measurement:1.7 mm; Torque:0.95 mm; Pilot Pressure:0.85 mm; Maximum rotational speed:0.3 mm; Pressurefree Operation:0.3 mm; Maximum Permissible Speed (limit Speed):45.7 mm; Rate Of Pressure ChangeDisplacement, geometric, per revolution:49.8 mm; Drive Power:0.047 Kg; Case volume:7,25 kN; Sequence Valve:5 kN; Determining Operating Characteristics:14000 r/min; Nominal Resistance:Single Shield with Snap Ring; Moment of inertia rotary group:Cylindrical Bore; Configuration:Single Row; Bore Size:30 mm; Outside Diameter:47 mm; Width:9 mm; Fillet Radius/Chamfer:0.3 mm; r1:0.3 mm; Snap Ring Width:0.9 mm; Snap Ring Outside Diameter:49.8 mm; D1 (max):45.7 mm; a (max):1.7 mm; b (min):1 mm; Dynamic Load Rating:7,250 N; Static Load Rating:5,000 N; Limiting Speed - Grease:14,000 rpm; Limiting Speed - Oil:17,000 rpm; Factor fo:15.8; Radial Clearance:0.005 to 0.020 mm; da (min):32 mm; Da (max):45 mm; Dx (min):50.5 mm; ra (max):0.3 mm; Cy (max):2.3 mm;
CAT 387-9428 injectorControl Pressure Measurement:6906ZENR; Maximum Permissible Pilot Pressure:30x47x9; Pilot Pressure:30; Maximum Torque:47; Maximum Volume Flow:9; Voltage:30 mm; Rotary stiffness:47 mm; Control Fluid Drain:9 mm; Nominal Resistance:9 mm; Pressurefree Operation:1.7 mm; Weight (approx.):0.95 mm; Maximum Permissible Speed (limit Speed):0.85 mm; Power:0.3 mm; Case volume:0.3 mm; Rate Of Pressure ChangeDisplacement, geometric, per revolution:45.7 mm; Drive Speed:49.8 mm; Maximum rotational speed:0.047 Kg; Flow:7,25 kN; Torque:5 kN; Drive Power:14000 r/min; Moment of inertia rotary group:Single Shield with Snap Ring; Determining Operating Characteristics:Cylindrical Bore; Configuration:Single Row; Bore Size:30 mm; Outside Diameter:47 mm; Width:9 mm; Fillet Radius/Chamfer:0.3 mm; r1:0.3 mm; Snap Ring Width:0.9 mm; Snap Ring Outside Diameter:49.8 mm; D1 (max):45.7 mm; a (max):1.7 mm; b (min):1 mm; Dynamic Load Rating:7,250 N; Static Load Rating:5,000 N; Limiting Speed - Grease:14,000 rpm; Limiting Speed - Oil:17,000 rpm; Factor fo:15.8; Radial Clearance:0.005 to 0.020 mm; da (min):32 mm; Da (max):45 mm; Dx (min):50.5 mm; ra (max):0.3 mm; Cy (max):2.3 mm;

 

 

CAT 10R7652 injector Video

 

Contact Us

OIA Pump Machinery Parts Co., Ltd.
Address5, rue des Usines, BP 2017, 74010 Annecy Cedex, France
  • OIA Pump Machinery Parts Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

CAT 10R7652 Technical Articles

How do I adjust the pressure on my hydraulic pump?
How to set and adjust a pressure compensated control forFeb 14, 2020 — This is how you can adjust your pressure compensated control for your hydraulic pump. You can adjust it to a higher or lower pressure settings  When and How to Adjust...
What does P and T mean in hydraulics?
CHAPTER 10: Directional Control Valves, part 4 | HydraulicsThe only indication of the solenoid-operated valve is the solenoid slash mark in Any other spool center condition (except one with T blocked, and A, B, and P  Hydraulic Symbology 201...
Why might a pump be needed in a hydraulic system?
Hydraulics Flashcards | QuizletWhat is the output component of a hydraulic system named? The input What determines the size of the pump needed in a hydraulic circuit? The flow rate that  Why might a pump be needed in a Hydraulic system? |...

CAT injector CATEGORIES

  • Rexroth PRESSURE RELIEF VALVE
  • Yuken Piston pump
  • DENISON vane pump
  • Rexroth Vane pump
  • Yuken Double Vane pump
  • Rexroth Piston Pump
  • Yuken pressure valve
  • Danfoss Shut-off valves
  • Rexroth THROTTLE VALVE
  • Yuken single Vane pump
  • Rexroth check valve
  • PAKER Piston Pump
  • Rexroth Solenoid directional valve
  • CAT injector
  • BOSCH injector
  • CUMMINS injector
  • DEUTZ injector
  • COMMON RAIL injector
MORE

Customers Who Viewed CAT 10R7652 Also Viewed

  • CAT 387-9427 injector
  • CAT 10R-7225 injector
  • CAT 387-9430 injector
  • CAT 328-2585 injector
  • CAT 387-9428 injector
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

OIA Pump Machinery Parts Co., Ltd.. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Rexroth PRESSURE RELIEF VALVE
    • Yuken Piston pump
    • DENISON vane pump
    • Rexroth Vane pump
    • Yuken Double Vane pump
    • Rexroth Piston Pump
    • Yuken pressure valve
    • Danfoss Shut-off valves
    • Rexroth THROTTLE VALVE
    • Yuken single Vane pump
    • Rexroth check valve
    • PAKER Piston Pump
    • Rexroth Solenoid directional valve
    • CAT injector
    • BOSCH injector
    • CUMMINS injector
    • DEUTZ injector
    • COMMON RAIL injector
  • Technical Articles
  • Rexroth PRESSURE RELIEF VALVE
  • Yuken Piston pump
  • DENISON vane pump
✖

Home

Stock Categories

Technical Articles

Rexroth PRESSURE RELIEF VALVE

Yuken Piston pump

DENISON vane pump

Contact Us