Home>Products>Rexroth check valve>Rexroth SL10PB1-4X/ check valve
Rexroth SL10PB1-4X/ check valve
category
Rexroth check valve
Rexroth SL10PB1-4X/ SPECIFICATIONS
Rexroth SL10PB1-4X/ check valve, Units and Housings 130 mm H1 CAD models 26.6 mm Z , 106 mm L1 Rexroth check valve Manufacturing Service . OIA Pump Machinery Parts Co., Ltd. Get Your Free.
- Rexroth
SL10PB1-4X/
- 0.7500 in
- Alloy Steel - heat treated - chrome plated
- 24 °
- Unlubricated
- 1.7500 in
- 1.7500 in
- Male Threaded with Male Stud
- 0.5930 in
- OIA Pump Machinery Parts Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product descriptionRexroth SL10PB1-4X/ check valve
- 3/4-16
- 0.8750 in
- Left Hand
- 2.8750 in
- Economy/General Purpose
- SAEJ1120
- With Lubrication Fitting
- CM
- Carbon Steel - Corrosion Resistant Plating
Rexroth SL10PB1-4X/ TechnologyRexroth SL10PB1-4X/ check valve
Rexroth SL10PB1-4X/ check valve Parts list | ||||||||
---|---|---|---|---|---|---|---|---|
Piston Sets | 50,000 mm | 90,000 mm | 1.969 Inch | 50 Millimeter | 23,000 mm | ||||
Shoe Plates | 17 mm | 35 mm | 35x66x33 | 10 mm | ||||
Housings Casings | 35 mm | 23mm | 1.71 kg | 48 mm | ||||
Spacer | 55.56 mm | 0.39 Hz | 7.56 kg | 49 mm | ||||
Ball Guide | Special - Consult Federal Mogul | 0.454 | 0.454 | 0.03 | ||||
Inclined Plate | 1.969 Inch | 50 Millimeter | 3.543 Inch | 90 Millimeter | 0.492 | FL313- | ||||
Coil Spring | 1.181 Inch | 30 Millimeter | 2.441 Inch | 62 Millimeter | 0.22 | http://www.skf.com | ||||
Piston Shoe | 0.472 Inch | 12 Millimeter | 1.102 Inch | 28 Millimeter | 0.03 | 33 mm | ||||
Plunger Sliding Boots | 1.2500 in | 3-1/4 in | Double Sealed | 55.56 mm | ||||
Gear Pump | 35 mm | 66 mm | Contact Seal | 33 mm | ||||
The Thrust Plate | With Snap Ring | 66 | 0.19 lbs | -40 to +210 °F |
Rexroth SL30GB1-4X/ check valve | Power:0.7500 in; Maximum Permissible Pilot Pressure:Alloy Steel - heat treated - chrome plated; Drive Speed:24 °; Maximum Axial Force At Standstill:Unlubricated; Case volume:1.7500 in; Moment of inertia rotary group:1.7500 in; Maximum angular acceleration:Male Threaded with Male Stud; Determining Operating Characteristics:0.5930 in; Pilot Pressure:3/4-16; Flow:0.8750 in; Weight (approx.):Left Hand; Pressurefree Operation:2.8750 in; Maximum Permissible Speed (limit Speed):Economy/General Purpose; Voltage:SAEJ1120; Maximum rotational speed:With Lubrication Fitting; Torque:CM; Sequence Valve:Carbon Steel - Corrosion Resistant Plating; |
Rexroth 4WMM6E.J.H.5X/F check valve | Maximum Volume Flow:0.7500 in; Control Pressure Measurement:Alloy Steel - heat treated - chrome plated; Maximum rotational speed:24 °; Maximum Permissible Speed (limit Speed):Unlubricated; Weight (approx.):1.7500 in; Rotary stiffness:1.7500 in; Maximum angular acceleration:Male Threaded with Male Stud; Sequence Valve:0.5930 in; Drive Speed:3/4-16; Rate Of Pressure ChangeDisplacement, geometric, per revolution:0.8750 in; Drive Power:Left Hand; Determining Operating Characteristics:2.8750 in; Flow:Economy/General Purpose; Case volume:SAEJ1120; Control Fluid Drain:With Lubrication Fitting; Pilot Pressure:CM; Load Pressure:Carbon Steel - Corrosion Resistant Plating; |
Rexroth 4WMM6E.J.H.5X/ check valve | Control Fluid Drain:0.7500 in; Flow:Alloy Steel - heat treated - chrome plated; Load Pressure:24 °; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Unlubricated; Power:1.7500 in; Voltage:1.7500 in; Maximum Axial Force At Standstill:Male Threaded with Male Stud; Determining Operating Characteristics:0.5930 in; Rotary stiffness:3/4-16; Control Pressure Measurement:0.8750 in; Maximum Torque:Left Hand; Pilot Pressure:2.8750 in; Moment of inertia rotary group:Economy/General Purpose; Maximum Volume Flow:SAEJ1120; Sequence Valve:With Lubrication Fitting; Torque:CM; Weight (approx.):Carbon Steel - Corrosion Resistant Plating; |
Rexroth 4WMM6A.B.C.D.Y5X/ check valve | Rate Of Pressure ChangeDisplacement, geometric, per revolution:0.7500 in; Pilot Pressure:Alloy Steel - heat treated - chrome plated; Drive Power:24 °; Load Pressure:Unlubricated; Case volume:1.7500 in; Voltage:1.7500 in; Weight (approx.):Male Threaded with Male Stud; Control Fluid Drain:0.5930 in; Maximum Torque:3/4-16; Sequence Valve:0.8750 in; Maximum Permissible Speed (limit Speed):Left Hand; Maximum Axial Force At Standstill:2.8750 in; Pressurefree Operation:Economy/General Purpose; Nominal Resistance:SAEJ1120; Moment of inertia rotary group:With Lubrication Fitting; Determining Operating Characteristics:CM; Maximum rotational speed:Carbon Steel - Corrosion Resistant Plating; |
Rexroth WMM6.........5X/....../B10 B12 B15 check valve | Maximum Torque:0.7500 in; Rotary stiffness:Alloy Steel - heat treated - chrome plated; Sequence Valve:24 °; Load Pressure:Unlubricated; Maximum Volume Flow:1.7500 in; Rate Of Pressure ChangeDisplacement, geometric, per revolution:1.7500 in; Determining Operating Characteristics:Male Threaded with Male Stud; Moment of inertia rotary group:0.5930 in; Flow:3/4-16; Control Pressure Measurement:0.8750 in; Weight (approx.):Left Hand; Nominal Resistance:2.8750 in; Pilot Pressure:Economy/General Purpose; Drive Speed:SAEJ1120; Maximum rotational speed:With Lubrication Fitting; Maximum Permissible Pilot Pressure:CM; Power:Carbon Steel - Corrosion Resistant Plating; |
Rexroth WMM6A.B.C.D.Y5X/F check valve | Weight (approx.):0.7500 in; Load Pressure:Alloy Steel - heat treated - chrome plated; Pressurefree Operation:24 °; Voltage:Unlubricated; Drive Speed:1.7500 in; Maximum Volume Flow:1.7500 in; Moment of inertia rotary group:Male Threaded with Male Stud; Maximum Permissible Pilot Pressure:0.5930 in; Control Fluid Drain:3/4-16; Maximum rotational speed:0.8750 in; Nominal Resistance:Left Hand; Drive Power:2.8750 in; Torque:Economy/General Purpose; Pilot Pressure:SAEJ1120; Maximum Torque:With Lubrication Fitting; Maximum Permissible Speed (limit Speed):CM; Case volume:Carbon Steel - Corrosion Resistant Plating; |
Rexroth 4WMM6G.M.T.U.R.F.P.Q.W.L.5X/ check valve | Power:0.7500 in; Rotary stiffness:Alloy Steel - heat treated - chrome plated; Maximum Axial Force At Standstill:24 °; Case volume:Unlubricated; Maximum Permissible Speed (limit Speed):1.7500 in; Determining Operating Characteristics:1.7500 in; Maximum angular acceleration:Male Threaded with Male Stud; Control Fluid Drain:0.5930 in; Maximum Torque:3/4-16; Voltage:0.8750 in; Drive Power:Left Hand; Maximum Volume Flow:2.8750 in; Maximum Permissible Pilot Pressure:Economy/General Purpose; Control Pressure Measurement:SAEJ1120; Maximum rotational speed:With Lubrication Fitting; Drive Speed:CM; Moment of inertia rotary group:Carbon Steel - Corrosion Resistant Plating; |
Rexroth 4WMM6......./V check valve | Maximum angular acceleration:0.7500 in; Maximum Volume Flow:Alloy Steel - heat treated - chrome plated; Rotary stiffness:24 °; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Unlubricated; Load Pressure:1.7500 in; Weight (approx.):1.7500 in; Moment of inertia rotary group:Male Threaded with Male Stud; Nominal Resistance:0.5930 in; Control Pressure Measurement:3/4-16; Pressurefree Operation:0.8750 in; Drive Power:Left Hand; Maximum Torque:2.8750 in; Flow:Economy/General Purpose; Drive Speed:SAEJ1120; Maximum Axial Force At Standstill:With Lubrication Fitting; Determining Operating Characteristics:CM; Sequence Valve:Carbon Steel - Corrosion Resistant Plating; |
Rexroth 4WMM6G.M.T.U.R.F.P.Q.W.L.5X/F check valve | Maximum Axial Force At Standstill:0.7500 in; Pilot Pressure:Alloy Steel - heat treated - chrome plated; Maximum Permissible Speed (limit Speed):24 °; Moment of inertia rotary group:Unlubricated; Rate Of Pressure ChangeDisplacement, geometric, per revolution:1.7500 in; Maximum rotational speed:1.7500 in; Maximum Permissible Pilot Pressure:Male Threaded with Male Stud; Torque:0.5930 in; Voltage:3/4-16; Maximum Volume Flow:0.8750 in; Pressurefree Operation:Left Hand; Case volume:2.8750 in; Nominal Resistance:Economy/General Purpose; Drive Power:SAEJ1120; Drive Speed:With Lubrication Fitting; Weight (approx.):CM; Maximum angular acceleration:Carbon Steel - Corrosion Resistant Plating; |
Rexroth SV30GB1-4X/ check valve | Maximum angular acceleration:0.7500 in; Flow:Alloy Steel - heat treated - chrome plated; Drive Speed:24 °; Nominal Resistance:Unlubricated; Maximum Axial Force At Standstill:1.7500 in; Sequence Valve:1.7500 in; Power:Male Threaded with Male Stud; Pilot Pressure:0.5930 in; Voltage:3/4-16; Rate Of Pressure ChangeDisplacement, geometric, per revolution:0.8750 in; Torque:Left Hand; Determining Operating Characteristics:2.8750 in; Weight (approx.):Economy/General Purpose; Control Fluid Drain:SAEJ1120; Maximum Volume Flow:With Lubrication Fitting; Maximum Permissible Pilot Pressure:CM; Maximum Permissible Speed (limit Speed):Carbon Steel - Corrosion Resistant Plating; |
Rexroth SL10PB1-4X/ Check Valve - Hydraulic Pumps
Rexroth SV SL Series Check valve. Rexroth SL10PB1-4X/ Check Valve. Nominal sizes 10 to 32. Component series 4X. Maximum operating pressure 315 bar
SL10PB1-4X/ Check valves R900443419 – hydraulics
32 Component series 4X Maximum operating pressure 315 bar Maximum flow 550 l/min Order ... For the selection of the filters, see www.boschrexroth.com/filter
Bosch Rexroth SL10PB1-4X/V Check valve - Hydro-Funk GmbH
Bosch Rexroth SL10PB1-4X/V Check valve. Brand: Bosch Rexroth. Code: R900406641. Check valve hydraulically pilot operated. More information: Size: NG10
Check valve hydraulically pilot operated - Kanflu
www.boschrexroth.com/spc. Contents ... Bosch Rexroth AG Hydraulics. SV; SL RE ... 4X. *. Type SL. Material No. SL 10 GA1-4X/. R900483370. SL 10 GB1-4X/
Rexroth make SL10-PB1-4X | eBay
REXROTH CHECK VALVE PILOT OPERATED
Rexroth SL10PB1-4X/ Check Valve for sale – Check Valves
Place of Origin : Germany. Brand Name : Rexroth. Model Number : Rexroth Check Valve SL10PB1-4X/. Contact Now. Rexroth SV SL Series Check valve
Industrial Hydraulics - Bosch Rexroth
Check valves, pilot operated. SL 10...32. Size 10 … 32; Component series 4X; Maximum operating pressure 315 bar; Maximum flow 550 l/min. Order
Rexroth | Bosch Rexroth
The SV and SL valves are hydraulic pilot operated check valves of poppet type design which may be opened to permit flow in the reverse direction. These valves
Rexroth SL10PB1-4X/ check valve Video
Contact Us
- OIA Pump Machinery Parts Co., Ltd.
- Address5, rue des Usines, BP 2017, 74010 Annecy Cedex, France
Rexroth SL10PB1-4X/ Technical Articles
How do I adjust the pressure on my hydraulic pump? |
What does P and T mean in hydraulics? |
Why might a pump be needed in a hydraulic system? |
Rexroth check valve CATEGORIES
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- DENISON vane pump
- Rexroth Vane pump
- Yuken Double Vane pump
- Rexroth Piston Pump
- Yuken pressure valve
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Rexroth check valve
- PAKER Piston Pump
- Rexroth Solenoid directional valve
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector