English- Home
- Stock Categories
- Technical Articles
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- DENISON vane pump
Home>Products>CAT injector>CAT 10R7675 injector
CAT 10R7675 injector
category
CAT injector
CAT 10R7675 SPECIFICATIONS
Browse CAT 10R7675 injector Categories in 84.3 mm WPD the OIA Pump Machinery Parts Co., Ltd. Manufacturers Online Free. 1.78 K - Factor8 including CAT injector.
- CAT
10R7675
- 0.7500 in
- 1-17/64 in
- Round
- 1-1/16 in
- Standard Duty
- 1-21/32 in
- Three-Bolt Bracket Style
- 2-7/16 in
-
OIA Pump Machinery Parts Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product featuresCAT 10R7675 injector
- Cast Iron - Nickel Protection
- 2-3/64 in
- Set Screw
- 1-5/16 in
- 2450 lbf
- 3/8
- 1190 lbf
- Lubrication Fitting
- Contact with Flinger
- MUCFK200NP
- 1.220 in
- MUC204-12
CAT 10R7675 Products and servicesCAT 10R7675 injector
CAT 10R7675 injector Parts list | ||||||||
|---|---|---|---|---|---|---|---|---|
| Set Plate | 85 mm | 150 mm | 25 mm | 38 mm | ||||
| Valve Plates | 30 mm | 78 mm | 1,06 Kg | 61 kN | ||||
| Plunger Sliding Boots | 20 mm | 52 mm | 0,227 Kg | 42 kN | ||||
| Bearings | 15 | 19 | 0,005 Kg | 7,21 kN | ||||
| Block Cylinder | 180 mm | 230 mm | 2,835 Kg | 240 kN | ||||
| Cylinder | 95 mm | 200 mm | 14 Kg | 540 kN | ||||
| Shafts | 75 mm | 130 mm | 45 | 0 Inch | 0 Millimeter | ||||
| Shoe Plates | 3 Inch | 76.2 Millimeter | 3.063 Inch | 77.8 Millimeter | 6.81 | 6.375 Inch | 161.925 Millimeter | ||||
| Friction Plate | 4 Inch | 101.6 Millimeter | 6.375 Inch | 161.925 Millimeter | 2.756 | Bearing | ||||
| Separator | 1.181 Inch | 30 Millimeter | 2.598 Inch | 66 Millimeter | - | 116.5 mm | ||||
| Central Shaft | 240 kN | B Seal | 11.0 lb | 0,227 Kg | ||||
| Cylinder Blocks | 1.04 in | 4.8125 in | N/A | 0,227 Kg | ||||
| Ball Guides | 60,325 mm | 1,35 mm | Mounted Bearing | 2.8 | ||||
| Rod | 3 | Nitrile | 0.11 lbs | 108 mm | ||||
| CAT 387-9427 injector | Control Pressure Measurement:0.7500 in; Pilot Pressure:1-17/64 in; Drive Speed:Round; Sequence Valve:1-1/16 in; Maximum Torque:Standard Duty; Control Fluid Drain:1-21/32 in; Rotary stiffness:Three-Bolt Bracket Style; Case volume:2-7/16 in; Maximum Permissible Speed (limit Speed):Cast Iron - Nickel Protection; Maximum angular acceleration:2-3/64 in; Moment of inertia rotary group:Set Screw; Maximum Volume Flow:1-5/16 in; Voltage:2450 lbf; Weight (approx.):3/8; Maximum Axial Force At Standstill:1190 lbf; Power:Lubrication Fitting; Maximum Permissible Pilot Pressure:Contact with Flinger; Load Pressure:MUCFK200NP; Torque:1.220 in; Maximum rotational speed:MUC204-12; |
| CAT 328-2585 injector | Drive Power:0.7500 in; Moment of inertia rotary group:1-17/64 in; Power:Round; Control Fluid Drain:1-1/16 in; Maximum rotational speed:Standard Duty; Flow:1-21/32 in; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Three-Bolt Bracket Style; Weight (approx.):2-7/16 in; Determining Operating Characteristics:Cast Iron - Nickel Protection; Torque:2-3/64 in; Maximum Torque:Set Screw; Sequence Valve:1-5/16 in; Voltage:2450 lbf; Drive Speed:3/8; Maximum Permissible Pilot Pressure:1190 lbf; Maximum Axial Force At Standstill:Lubrication Fitting; Nominal Resistance:Contact with Flinger; Maximum angular acceleration:MUCFK200NP; Pilot Pressure:1.220 in; Control Pressure Measurement:MUC204-12; |
| CAT 328-2586 injector | Control Fluid Drain:0.7500 in; Drive Speed:1-17/64 in; Maximum rotational speed:Round; Maximum Permissible Pilot Pressure:1-1/16 in; Case volume:Standard Duty; Torque:1-21/32 in; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Three-Bolt Bracket Style; Nominal Resistance:2-7/16 in; Maximum angular acceleration:Cast Iron - Nickel Protection; Pilot Pressure:2-3/64 in; Maximum Volume Flow:Set Screw; Maximum Permissible Speed (limit Speed):1-5/16 in; Weight (approx.):2450 lbf; Flow:3/8; Drive Power:1190 lbf; Sequence Valve:Lubrication Fitting; Rotary stiffness:Contact with Flinger; Load Pressure:MUCFK200NP; Maximum Torque:1.220 in; Moment of inertia rotary group:MUC204-12; |
| CAT 243-4502 injector | Case volume:0.7500 in; Control Pressure Measurement:1-17/64 in; Torque:Round; Rotary stiffness:1-1/16 in; Load Pressure:Standard Duty; Power:1-21/32 in; Drive Speed:Three-Bolt Bracket Style; Maximum angular acceleration:2-7/16 in; Maximum Axial Force At Standstill:Cast Iron - Nickel Protection; Determining Operating Characteristics:2-3/64 in; Nominal Resistance:Set Screw; Pilot Pressure:1-5/16 in; Moment of inertia rotary group:2450 lbf; Maximum Torque:3/8; Maximum Volume Flow:1190 lbf; Control Fluid Drain:Lubrication Fitting; Weight (approx.):Contact with Flinger; Pressurefree Operation:MUCFK200NP; Maximum rotational speed:1.220 in; Maximum Permissible Pilot Pressure:MUC204-12; |
| CAT 269-1839 injector | Determining Operating Characteristics:0.7500 in; Maximum Permissible Pilot Pressure:1-17/64 in; Maximum Permissible Speed (limit Speed):Round; Rate Of Pressure ChangeDisplacement, geometric, per revolution:1-1/16 in; Maximum angular acceleration:Standard Duty; Rotary stiffness:1-21/32 in; Control Pressure Measurement:Three-Bolt Bracket Style; Case volume:2-7/16 in; Torque:Cast Iron - Nickel Protection; Maximum Torque:2-3/64 in; Maximum rotational speed:Set Screw; Pilot Pressure:1-5/16 in; Maximum Volume Flow:2450 lbf; Drive Power:3/8; Weight (approx.):1190 lbf; Pressurefree Operation:Lubrication Fitting; Sequence Valve:Contact with Flinger; Nominal Resistance:MUCFK200NP; Drive Speed:1.220 in; Control Fluid Drain:MUC204-12; |
| CAT 387-9430 injector | Drive Power:0.7500 in; Control Pressure Measurement:1-17/64 in; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Round; Maximum angular acceleration:1-1/16 in; Maximum Volume Flow:Standard Duty; Weight (approx.):1-21/32 in; Determining Operating Characteristics:Three-Bolt Bracket Style; Drive Speed:2-7/16 in; Voltage:Cast Iron - Nickel Protection; Flow:2-3/64 in; Torque:Set Screw; Maximum rotational speed:1-5/16 in; Maximum Permissible Speed (limit Speed):2450 lbf; Power:3/8; Maximum Torque:1190 lbf; Nominal Resistance:Lubrication Fitting; Pressurefree Operation:Contact with Flinger; Pilot Pressure:MUCFK200NP; Control Fluid Drain:1.220 in; Maximum Permissible Pilot Pressure:MUC204-12; |
| CAT 241-3239 injector | Maximum Volume Flow:0.7500 in; Control Fluid Drain:1-17/64 in; Moment of inertia rotary group:Round; Flow:1-1/16 in; Power:Standard Duty; Load Pressure:1-21/32 in; Case volume:Three-Bolt Bracket Style; Determining Operating Characteristics:2-7/16 in; Rate Of Pressure ChangeDisplacement, geometric, per revolution:Cast Iron - Nickel Protection; Maximum rotational speed:2-3/64 in; Maximum Permissible Pilot Pressure:Set Screw; Maximum Permissible Speed (limit Speed):1-5/16 in; Voltage:2450 lbf; Maximum angular acceleration:3/8; Rotary stiffness:1190 lbf; Weight (approx.):Lubrication Fitting; Control Pressure Measurement:Contact with Flinger; Pilot Pressure:MUCFK200NP; Nominal Resistance:1.220 in; Maximum Torque:MUC204-12; |
| CAT 387-9428 injector | Power:0.7500 in; Voltage:1-17/64 in; Rotary stiffness:Round; Maximum Volume Flow:1-1/16 in; Pressurefree Operation:Standard Duty; Case volume:1-21/32 in; Moment of inertia rotary group:Three-Bolt Bracket Style; Maximum rotational speed:2-7/16 in; Control Pressure Measurement:Cast Iron - Nickel Protection; Weight (approx.):2-3/64 in; Maximum Permissible Speed (limit Speed):Set Screw; Maximum angular acceleration:1-5/16 in; Torque:2450 lbf; Load Pressure:3/8; Drive Power:1190 lbf; Maximum Axial Force At Standstill:Lubrication Fitting; Drive Speed:Contact with Flinger; Nominal Resistance:MUCFK200NP; Determining Operating Characteristics:1.220 in; Rate Of Pressure ChangeDisplacement, geometric, per revolution:MUC204-12; |
| CAT 10R-7225 injector | Maximum rotational speed:0.7500 in; Maximum Permissible Speed (limit Speed):1-17/64 in; Power:Round; Moment of inertia rotary group:1-1/16 in; Rotary stiffness:Standard Duty; Load Pressure:1-21/32 in; Maximum angular acceleration:Three-Bolt Bracket Style; Rate Of Pressure ChangeDisplacement, geometric, per revolution:2-7/16 in; Maximum Axial Force At Standstill:Cast Iron - Nickel Protection; Weight (approx.):2-3/64 in; Flow:Set Screw; Voltage:1-5/16 in; Torque:2450 lbf; Nominal Resistance:3/8; Drive Power:1190 lbf; Sequence Valve:Lubrication Fitting; Control Fluid Drain:Contact with Flinger; Determining Operating Characteristics:MUCFK200NP; Pilot Pressure:1.220 in; Pressurefree Operation:MUC204-12; |
| CAT 238-8901 injector | Case volume:0.7500 in; Pressurefree Operation:1-17/64 in; Power:Round; Control Fluid Drain:1-1/16 in; Determining Operating Characteristics:Standard Duty; Drive Power:1-21/32 in; Maximum Volume Flow:Three-Bolt Bracket Style; Control Pressure Measurement:2-7/16 in; Weight (approx.):Cast Iron - Nickel Protection; Maximum Axial Force At Standstill:2-3/64 in; Rotary stiffness:Set Screw; Pilot Pressure:1-5/16 in; Voltage:2450 lbf; Maximum Permissible Pilot Pressure:3/8; Maximum Torque:1190 lbf; Maximum angular acceleration:Lubrication Fitting; Nominal Resistance:Contact with Flinger; Moment of inertia rotary group:MUCFK200NP; Rate Of Pressure ChangeDisplacement, geometric, per revolution:1.220 in; Torque:MUC204-12; |
CAT 10R7675 injector Video
Contact Us
- OIA Pump Machinery Parts Co., Ltd.
- Address5, rue des Usines, BP 2017, 74010 Annecy Cedex, France
CAT 10R7675 Technical Articles
| How do I adjust the pressure on my hydraulic pump? |
| What does P and T mean in hydraulics? |
| Why might a pump be needed in a hydraulic system? |
CAT injector CATEGORIES
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- DENISON vane pump
- Rexroth Vane pump
- Yuken Double Vane pump
- Rexroth Piston Pump
- Yuken pressure valve
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Rexroth check valve
- PAKER Piston Pump
- Rexroth Solenoid directional valve
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
CAT 387-9427 injector
CAT 10R-7225 injector
CAT 387-9430 injector
CAT 328-2585 injector
CAT 387-9428 injector