English- Home
- Stock Categories
- Technical Articles
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- DENISON vane pump
Home>Products>CAT injector>CAT 253-0616 injector
CAT 253-0616 injector
category
CAT injector
CAT 253-0616 SPECIFICATIONS
With OIA Pump Machinery Parts Co., Ltd. over 10170 full-service 20.6 C stores, our CAT 253-0616 injector inventory is extensive and 13.2 fo our parts are priced right. within 24 0 ALPHA_ hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
- CAT
253-0616
- Straight Bushing
- 49 N/mm²
- 1.0000 in
- 3.60 N/mm² - m/s
- 1.1250 in
- -392 to +536 °F
- 1.2500 in
- RoHS
-
OIA Pump Machinery Parts Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product featuresCAT 253-0616 injector
- PTFE w/ Metal Backing
- LFB
- 1.1250 in
- Drymet LF
- 0.65 m/s
CAT 253-0616 Products and servicesCAT 253-0616 injector
CAT 253-0616 injector Parts list | ||||||||
|---|---|---|---|---|---|---|---|---|
| Ball Guides | 20 mm | 29 mm | 213 kN | 24.7 mm | ||||
| Variable Piston | 93 mm | 155 mm | 6,84 Kg | Yes | ||||
| Snap Ring | 28.58 mm | 24.7 mm | 1.18 kg | 30 mm | ||||
| Plunger Sliding Boots | Chrome Steel | 9.040 in | 0.118 | No Cover | ||||
| Block Cylinder | 193.569 | 0.47 kg | 4.272 | 1 in | ||||
| Press Pin | 0 Inch | 0 Millimeter | 3.5 Inch | 88.9 Millimeter | 0.21 | 0.531 Inch | 13.487 Millimeter | ||||
| Bearings | 75 | QVFL22V315SB | 19.5 kN | Bearing Steel | ||||
| Housings Casings | 3800 | 33 | 55 lb | 6,84 Kg | ||||
| Separator | 45 | No Cover | Needle Bearing | B04144 | ||||
| Push Rod | 125000 lb | 180x250x33 | Used for Light load | 0883450042895 | ||||
| Cylinder | 35mm | 72mm | 20 mm | 27mm | ||||
| Seal Kits | 30 mm | 62 mm | 89 mm | 29 mm | ||||
| Drive Shaft | 180 mm | 250 mm | 9.843 Inch | 250 Millimeter | 33 mm | ||||
| The Thrust Plate | 29 mm | 16.4 | 3.5 Inch | 88.9 Millimeter | 76 mm | ||||
| CAT 243-4502 injector | Power:Straight Bushing; Drive Power:49 N/mm²; Sequence Valve:1.0000 in; Control Fluid Drain:3.60 N/mm² - m/s; Load Pressure:1.1250 in; Moment of inertia rotary group:-392 to +536 °F; Flow:1.2500 in; Maximum Permissible Pilot Pressure:RoHS; Voltage:PTFE w/ Metal Backing; Control Pressure Measurement:LFB; Torque:1.1250 in; Determining Operating Characteristics:Drymet LF; Maximum Axial Force At Standstill:0.65 m/s; |
| CAT 10R-7225 injector | Drive Speed:Straight Bushing; Pressurefree Operation:49 N/mm²; Sequence Valve:1.0000 in; Power:3.60 N/mm² - m/s; Maximum Axial Force At Standstill:1.1250 in; Case volume:-392 to +536 °F; Rate Of Pressure ChangeDisplacement, geometric, per revolution:1.2500 in; Maximum Volume Flow:RoHS; Load Pressure:PTFE w/ Metal Backing; Pilot Pressure:LFB; Control Fluid Drain:1.1250 in; Maximum rotational speed:Drymet LF; Weight (approx.):0.65 m/s; |
| CAT 328-2585 injector | Control Pressure Measurement:Straight Bushing; Load Pressure:49 N/mm²; Control Fluid Drain:1.0000 in; Case volume:3.60 N/mm² - m/s; Drive Power:1.1250 in; Maximum Permissible Pilot Pressure:-392 to +536 °F; Voltage:1.2500 in; Rate Of Pressure ChangeDisplacement, geometric, per revolution:RoHS; Pilot Pressure:PTFE w/ Metal Backing; Maximum Axial Force At Standstill:LFB; Maximum angular acceleration:1.1250 in; Pressurefree Operation:Drymet LF; Nominal Resistance:0.65 m/s; |
| CAT 238-8901 injector | Voltage:Straight Bushing; Maximum Torque:49 N/mm²; Maximum angular acceleration:1.0000 in; Maximum rotational speed:3.60 N/mm² - m/s; Maximum Axial Force At Standstill:1.1250 in; Drive Speed:-392 to +536 °F; Maximum Volume Flow:1.2500 in; Moment of inertia rotary group:RoHS; Nominal Resistance:PTFE w/ Metal Backing; Determining Operating Characteristics:LFB; Load Pressure:1.1250 in; Pilot Pressure:Drymet LF; Rate Of Pressure ChangeDisplacement, geometric, per revolution:0.65 m/s; |
| CAT 269-1839 injector | Determining Operating Characteristics:Straight Bushing; Maximum rotational speed:49 N/mm²; Load Pressure:1.0000 in; Maximum Permissible Pilot Pressure:3.60 N/mm² - m/s; Nominal Resistance:1.1250 in; Flow:-392 to +536 °F; Sequence Valve:1.2500 in; Case volume:RoHS; Control Pressure Measurement:PTFE w/ Metal Backing; Maximum Torque:LFB; Rotary stiffness:1.1250 in; Maximum angular acceleration:Drymet LF; Pilot Pressure:0.65 m/s; |
| CAT 387-9430 injector | Pilot Pressure:Straight Bushing; Moment of inertia rotary group:49 N/mm²; Pressurefree Operation:1.0000 in; Rate Of Pressure ChangeDisplacement, geometric, per revolution:3.60 N/mm² - m/s; Rotary stiffness:1.1250 in; Determining Operating Characteristics:-392 to +536 °F; Power:1.2500 in; Control Pressure Measurement:RoHS; Sequence Valve:PTFE w/ Metal Backing; Voltage:LFB; Nominal Resistance:1.1250 in; Weight (approx.):Drymet LF; Torque:0.65 m/s; |
| CAT 241-3239 injector | Voltage:Straight Bushing; Control Pressure Measurement:49 N/mm²; Power:1.0000 in; Sequence Valve:3.60 N/mm² - m/s; Pressurefree Operation:1.1250 in; Rate Of Pressure ChangeDisplacement, geometric, per revolution:-392 to +536 °F; Maximum rotational speed:1.2500 in; Case volume:RoHS; Determining Operating Characteristics:PTFE w/ Metal Backing; Maximum Axial Force At Standstill:LFB; Torque:1.1250 in; Maximum Permissible Pilot Pressure:Drymet LF; Flow:0.65 m/s; |
| CAT 387-9428 injector | Weight (approx.):Straight Bushing; Maximum Volume Flow:49 N/mm²; Control Fluid Drain:1.0000 in; Drive Power:3.60 N/mm² - m/s; Flow:1.1250 in; Maximum Axial Force At Standstill:-392 to +536 °F; Pilot Pressure:1.2500 in; Case volume:RoHS; Maximum Torque:PTFE w/ Metal Backing; Rate Of Pressure ChangeDisplacement, geometric, per revolution:LFB; Maximum Permissible Pilot Pressure:1.1250 in; Drive Speed:Drymet LF; Load Pressure:0.65 m/s; |
| CAT 328-2586 injector | Case volume:Straight Bushing; Power:49 N/mm²; Nominal Resistance:1.0000 in; Determining Operating Characteristics:3.60 N/mm² - m/s; Maximum rotational speed:1.1250 in; Maximum Permissible Pilot Pressure:-392 to +536 °F; Torque:1.2500 in; Flow:RoHS; Sequence Valve:PTFE w/ Metal Backing; Control Fluid Drain:LFB; Maximum angular acceleration:1.1250 in; Drive Speed:Drymet LF; Drive Power:0.65 m/s; |
| CAT 387-9427 injector | Maximum rotational speed:Straight Bushing; Maximum Axial Force At Standstill:49 N/mm²; Control Fluid Drain:1.0000 in; Moment of inertia rotary group:3.60 N/mm² - m/s; Torque:1.1250 in; Maximum Permissible Speed (limit Speed):-392 to +536 °F; Pressurefree Operation:1.2500 in; Maximum Torque:RoHS; Case volume:PTFE w/ Metal Backing; Maximum Permissible Pilot Pressure:LFB; Maximum Volume Flow:1.1250 in; Control Pressure Measurement:Drymet LF; Sequence Valve:0.65 m/s; |
CAT 253-0616 injector Video
Contact Us
- OIA Pump Machinery Parts Co., Ltd.
- Address5, rue des Usines, BP 2017, 74010 Annecy Cedex, France
CAT 253-0616 Technical Articles
| How do I adjust the pressure on my hydraulic pump? |
| What does P and T mean in hydraulics? |
| Why might a pump be needed in a hydraulic system? |
CAT injector CATEGORIES
- Rexroth PRESSURE RELIEF VALVE
- Yuken Piston pump
- DENISON vane pump
- Rexroth Vane pump
- Yuken Double Vane pump
- Rexroth Piston Pump
- Yuken pressure valve
- Danfoss Shut-off valves
- Rexroth THROTTLE VALVE
- Yuken single Vane pump
- Rexroth check valve
- PAKER Piston Pump
- Rexroth Solenoid directional valve
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
CAT 387-9427 injector
CAT 10R-7225 injector
CAT 387-9430 injector
CAT 328-2585 injector
CAT 387-9428 injector